Categories

False alarms and system malfunctions can be aggravating, and more importantly, could prevent your security system from working how it should. Fortunately, most problems, from false alarms to dead batteries, are simple to fix. Explore our tips for troubleshooting your home alarm system in Lincoln. We’ll help keep your household protected and your system operating the way it should.

Test Your Home Security System In Lincoln

One of the most effective ways to troubleshoot your home’s security is to test it! Modern systems allow you to put them in test mode to avoid initiating an emergency response. After moving to test mode, take these steps:

• Activate your system as you normally would when leaving.
• Open a door or window that uses a contact sensor, or test other devices. Shut the door or window once you’re done so it doesn’t trigger the alarm as you turn the system back on.
• Let the alarm resonate for 60 seconds to make sure a transmission is dispatched to the security provider and an entry is created in the alarm system log.
• Proceed to test devices as needed
• Inspect the systems’s activity log to validate functionality.

Rest assured, monitoring specialists will know that your system is involved in a test. Just be sure to switch off test mode when complete. It’s wise to test monthly or whenever you make changes to your home’s phone or internet connectivity.

Evaluate The Positioning And State Of Motion Sensors

Although an integral part of your alarm system, motion detectors are notorious for false alarms. Do your part to prevent them with some easy troubleshooting.

• Conduct a visual inspection. Are there things that could move within the sensor’s detection area, like a curtain blown in a breeze?
• Is the sensor clean? Cobwebs, dirt, and grime can cause malfunctions. Ensure the face is clean.
• Does the motion detector have pet immunity you can enable? Some can be configured to disregard pets weighing up to 100 pounds.
• When was the battery replaced? Low batteries can impact performance or lead to false alarms.
• Is a heat source impairing the sensor? Too much heat from direct sun or a fireplace can cause an alarm.

Keep Batteries Ready And Look Out For Low Battery Warnings

One of the great advantages of the latest home security systems is that they’ll let you know when batteries are running low. If your system uses a control panel or smartphone app, you’ll usually see messages there. Depending on your alarm, you might detect an intermittent beep when batteries are low. 

Contact sensors, motion detectors, smoke detectors, and other wireless tools have batteries that should be replaced every 1 to 2 years. It’s best to keep batteries on hand and set a replacement schedule. Top systems also include a backup battery for the primary control panel. This backup keeps your system operating if your power goes out and should recharge itself once power is back online. If it fails to recharge, you will have to replace it.

Troubleshooting Is Simple With ADT Home Security In Lincoln 

As the foremost name in home security, ADT creates systems that supply superior functionality and protection. Getting into test mode is easy through the ADT+ app or MyADT.com, and you’ll always receive updates when a battery is nearing depletion. Get in touch with Secure24 Alarm Systems, an authorized ADT dealer, to learn more and design a system perfectly suited to your Lincoln home. Place a call to (402) 277-9887 or complete our form today!