ADT® Authorized Dealer Serving Lincoln & Surrounding Areas
Carbon monoxide detector attached to wall of home
January 08, 2024

Where To Place Carbon Monoxide Detectors In Your Lincoln Home

Property owners must safeguard against a variety of risks like fire, flooding, and burglary. But what about a risk that you aren’t able to see or smell? Carbon monoxide poses a unique challenge as you might never realize it’s there. Even so, installing CO detectors can simply shield your loved ones and property. Find out more about this potentially lethal gas and where to place carbon monoxide detectors in your Lincoln residence.

What Is Carbon Monoxide?

Known as the silent killer due to its absence of color, taste, or odor, carbon monoxide is a common gas produced by the incomplete combustion of fuels. Any fuel-burning appliance like an oven or furnace can generate carbon monoxide. Even though you usually won’t have a problem, issues can arise when equipment is not regularly serviced or adequately vented. These missteps could cause a proliferation of this dangerous gas in your residence. Generators and heating appliances are the most common reasons for CO poisoning.

When subjected to lower amounts of CO, you might notice headaches, dizziness, fatigue nausea, or vomiting. Continuous exposure to high amounts may result in cardiorespiratory failure, and even death.

Suggestions On Where To Place Lincoln Carbon Monoxide Detectors

If you don’t own at least one carbon monoxide detector in your home, buy one now. Preferably, you ought to use one on each floor of your home, including basements. Browse these tips on where to place carbon monoxide detectors in Lincoln:

  • Install them on each level, specifically in places where you utilize fuel-burning appliances, such as furnaces, fireplaces, gas dryers, and water heaters.
  • Always install one no more than 10 feet away from sleeping areas. If you only install one CO detector, this is the place for it.
  • install them about 10 to 20 feet away from potential CO sources.
  • Do not position them directly next to or above fuel-consuming appliances, as a little carbon monoxide may be released when they start and set off a false alarm.
  • Secure them to walls approximately five feet above the floor so they may sample air where people are breathing it.
  • Avoid installing them in dead-air areas and beside windows or doors.
  • Put one in areas above attached garages.

Check your CO detectors often and maintain them per manufacturer guidelines. You will usually have to switch them out in six years or less. You should also make sure any fuel-consuming appliances are in in optimal working condition and have appropriate ventilation.